[. . . ] Before plugging in Make sure your electricity supply is the same as the one shown on the underside of your kettle. This kettle complies with European Economic Community Directive 89/336/EEC. [. . . ] safety G G G ብ ቤ G G G G ቧ G G G G G ቨ G G G G G G ᕢ ᕡ ᕣ Always use the filter and never overfill - boiling water may splash out. Avoid contact with steam coming out of the spout area when pouring and out of the lid or spout area when refilling. Get it checked or repaired: see ‘service’ Caution: Do not operate the kettle on an inclined surface. G before using for the first time 1 Wrap any excess cord around the underside of the powerbase ቨ. Key ቢ ባ ቤ ብ ቦ ቧ ቨ lid release on/off switch indicator light water level windows filter powerbase cord wrap to use your kettle 1 Fill the kettle through either the spout or lid. 4 Plug in and switch on, the inside of the kettle will illuminate and the indicator light will come on. G When limescale starts to build up on the heating element, buy a suitable descaler and descale your kettle. This makes boiled water look cloudy and leaves a deposit on the side of the kettle. G Alternatively, to reduce limescale build up, use filtered water to fill your kettle. The filter 1 To open the lid, push the lid release and pull the lid back ᕡ. 4 To re-fit the filter, slide it in until it rests on the notch under the spout ᕣ. Service and customer care G If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer. [. . . ] 4 To re-fit the filter, slide it in until it rests on the notch under the spout ᕣ. Service and customer care G If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer. [. . . ]